Wire Drawing Machine

Main Function and Type of Wire Drawing Machine The diameter of the wire rod produced by the steel mill is generally relatively thick, and the diameter range is generally 10mm -20mm. There are various application scenarios of steel wire in industrial production and life, and this relatively thick wire cannot be used directly.  Therefore, we need to perform secondary processing on the wire rod to produce multi-standard wire rods suitable for application scenarios. The most common equipment used for secondary processing of wire rods is wire drawing machines. The wire drawing machine is also often called the wire drawing machine. The types of the wire drawing machine can be divided into: water tank wire drawing machine, straight-in wire drawing machine, pulley wire drawing machine, continuous tank wire drawing machine, etc. The purpose of the wire drawing machine is to draw the relatively thick wire into a suitable standard wire, and the wire diameter after drawing is between 0.3mm-10m...

Structure and Usage of Wire Drawing Machine Equipment What devices are generally included in wire drawing machines? The editor will give you a brief introduction below to promote your further understanding and mastery of the structure of the wire drawing machine. The introduction is as follows. 1. Cable arrangement Cable wires are generally installed on stainless steel cable spools. Their main components are copper-based alloys, which are divided into left-hand and right-hand. According to different production process requirements, different numbers of pairs can be installed, but when installing, pay attention to the reverse installation, which will affect the formation of the silk cake. 2. Cable arrangement off-line device It has two functions. One is to make the cable arranging device move toward the machine head when the coiling starts. The other is to make the cable arranging device slowly move to the right as time and the thickness of the wire cake increase, thereby making the cab...