Drawing Machine Running Loss and Application Requirements

Drawing Machine


Drawing Machine Running Loss and Application Requirements


The defect of large loss in the operation of the wire drawing machine and the application requirements


Now the development prospects of the wire drawing machine industry have become better, and the damage to the fuselage of the equipment will be faster during the heating process. The main reason is that the traditional processing methods include electric cathode and incineration. 

The wire drawing machines running these two kinds of energy are constantly changing during the process of heating, which is very prone to open flames and exhaust gas pollution, which eventually leads to safety accidents.

The wire drawing machine has a defect of large loss during operation.

The wire drawing machine always has the defect of high power consumption but relatively low power during the operation process, so the loss of the equipment will be relatively large. For example, the temperature is not high enough and the heating cannot be balanced during heating, so it will directly appear in the production product. Deformation situation.

When the wire drawing machine is running, the loss is relatively large, so the performance and quality of the equipment will be greatly reduced. The high-efficiency energy-saving electromagnetic induction heating equipment can convert electrical energy into heat energy when it is in use, and then through balanced heating. The screw is not easy to bend and deform.

What are the requirements for using a wire drawing machine?

When the wire drawing machine is placed, it is necessary to ensure that its bottom is fixed, so that it can effectively prevent the vibration of the equipment during operation. During the debugging process, the drawing axis of the equipment and the center of the die hole need to be symmetrical, so that There will be a uniform effect between the two.

In order to prevent frequent parking of the wire drawing machine during the wire drawing process, the main reason is that the conflict caused by the tensile stress of the equipment during the drawing start process is much larger than the normal conflict, so the wear of the equipment will definitely increase gradually. The wire for drawing the wire needs to be preheated.

地点: 10 Ng.14 P. Nguyễn Lân, Phương Liệt, Thanh Xuân, Hà Nội, 越南

评论

发表评论

此博客中的热门博文

I am a Wire Drawing Machine, and I need Maintenance

图片
I am a Wire Drawing Machine, and I need Maintenance I am a wire drawing machine, which is composed of bearings, motors, yarn guide rods, forced beam splitters, controllers, etc. From the day I was assembled, passed the inspection, and left the factory, my mission and meaning have been doomed. Contribute to producing good fiberglass. When I came to the new factory, after being installed and debugged, I started my work. The two machine heads exchanged with each other, and the glass fiber was drawn out from the platinum bushing by winding and pulling.  The bundle comb is wound on the machine head covered with the paper tube, and the cycle is repeated until the set time is up, the machine head is changed, and the traction is continued. Throughout the year, from winter to spring, I work like time, non-stop operation, although it is hard work, hard work, day and night, but I will also get sick, the long-term wear and tear of parts, let me The sound of "creak" and "kuang kuang...
阅读全文

What is a Wire Drawing Machine?

图片
What is a Wire Drawing Machine? Wire drawing machine is a widely used mechanical equipment in industrial applications, widely used in machinery manufacturing, metal processing, petrochemical, plastics, bamboo, wood products, wire and cable, and other industries. Types of Wire Drawing Machine Wire drawing machines can be divided into metal wire drawing machines according to their uses (for the production and preprocessing of metal products such as standard parts); Plastic wire drawing machine (used in the plastic products industry to use polyester, nylon, polyethylene, polypropylene, polyester chips, etc. as raw materials to produce various hollow, solid round wires or flat wires for deep processing of special equipment); Bamboo wood wire drawing machine (special equipment for making chopsticks, toothpicks, barbecue sticks, etc. in the bamboo and wood products industry to pull out bamboo wire and wood wire for reprocessing), etc.
阅读全文

Features of Tungsten Carbide Wire Drawing Die

图片
Features of Tungsten Carbide Wire Drawing Die Although the materials of the drawing die can be different, among different drawing dies, the cemented carbide drawing dies to become the highlight. Today, tungsten carbide wire drawing dies to occupy an important position in the wire drawing industry. In this article, we will bring you the following characteristics of carbide wire drawing dies: 1. Strong power resistance During the process of wire drawing and extrusion, the wire drawing die will be subject to large extrusion, bending stress, impact, and other messy loads. Therefore, the material selected to make the wire drawing die should have high power resistance and outstanding hardenability after heat treatment to ensure that the die can be uniformly hardened. 2. Excellent wear resistance The wire drawing die should have high wear resistance to ensure normal service life and mass production of high-quality wire. Generally speaking, the hardness of tungsten carbide is directly proporti...
阅读全文